|
|
Properties of asphalt mixtures with RAP
Trnka, Lukáš ; Coufalíková, Iva (referee) ; Dašek, Ondřej (advisor)
The bachelor thesis deals with the properties of asphalt mixtures with reclaimed asphalt. Possibilities of rejuvenate of binder contained in reclaimed asphalt are mentioned in the theoretical part. There is explained the principle of rejuvenators function, types of rejuvenators and ways of rejuvenators dosing into the asphalt mixture. The procedures for performing the stiffness modulus test (2PB-TR) and the low temperature (TSRST) test are described in the following part. Individual tests are evaluated and asphalt mixtures are compared in the practical part of bachelor thesis.
|
|
|
Cold asphalt mixtures
Spáčil, Petr ; Hýzl, Petr (referee) ; Dašek, Ondřej (advisor)
The bachelor thesis is divided into theoretical and practical part. The theoretical part consists of explanation of the problem. The thesis includes definitions as Bitumen, Asphalt Mixture, Asphalt Binder, Cut-back Bitumen and Viscosity. The practical part is focused mainly on the description of the test methods used on Asphalt Binders and Mixtures which were intended for repairs. It describes differences between used Asphalt Binders and explains and describes other used materials. The practical part compares the mixtures of different Cut-back Bitumen. It describes the production process and project of Cut-back bitumen mixture, the production process of individual test solids and compares the differences with hot made asphalt mixture. It also describes the analysis of volumetric, mechanical-physical and funcional tests in purpose of evaluating the differences between standard Cut-back Bitumen and new biofluxed asphalt binder.
|
|
|
Use of R-material in asphalt mixtures with PMB type binder
Navrátilová, Pavlína ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
The diploma thesis is focused on the use of R-material in asphalt mixtures with a PMB type binder. The work is divided into a theoretical part and a practical part. The theoretical part describes the acquisition of R-material by road milling, the use of R-material, the binder used in the practical part of the work and the types of recycling. The practical part deals with the design of four types of asphalt mixtures with different content of R-material in the asphalt mixture. It also deals with the description of functional tests of asphalt mixtures and the results of these tests.
|
|
|
Asphalt Layers using Fibreglass Composite Materials
Sadil, Dominik ; Hýzl, Petr (referee) ; Šperka, Pavel (advisor)
The diploma thesis deals with using of reinforcing composite materials in asphalt layers. These geosynthetic materials are in road construction used especially to reduce spreading cracks and extend the service life of the construction. As par of this work, test specimens of different types of asphalt layers were produced. These samples were subjected to laboratory testing, where the results of different reinforced asphalt slabs were compared. Within the diploma thesis primarily deals with the testing of the shear bond strength between asphalt layers in order to determine what are the other influencing factors of the test. Another part of the thesis is the 4-point bending test, during which a special technology in the form of a DIC camera was used to monitor the behavior of the asphalt layer over time.
|
|
|
Asphalt mixtures with high resistance against cracks
Stromecký, Roman ; Šperka, Pavel (referee) ; Dašek, Ondřej (advisor)
In this bachelor's thesis were suggested two kinds of asphalt mixtures. The first one contains conventional asphalt binder and the second one Crumb Rubber modified Bitumen. The aim of this thesis is a comparison of stiffness and fatigue characteristics of these two mixtures by two-point bending test on truncated wedges. There will be also an evaluation of the impact of an asphalt addition of the Crumb Rubber modified Bitumen in one of these mixtures.
|
|
|
Coarse graded asphalt mixtures
Mucha, Ondřej ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
The bachelor’s thesis is focused on asphalt mixtures that contain coarser aggregates than currently allowed by technical regulations in the Czech Republic. The introductory part of the work describes the composition of asphalt mixtures, their division and use. Further deals with foreign experience with these types of asphalt mixtures and their use in the surrounding European countries and in the United States of America. The aim of this work is to obtain a theoretical overview of knowledge about coarse graded asphalt mixtures from foreign sources and research.
|
|
| |
|
|
The evaluation of properties of fine aggregate for asphalt mixtures
Kadlček, Jakub ; Sychra, Martin (referee) ; Dašek, Ondřej (advisor)
The diploma thesis is focused on evaluation of properties of fine aggregate by means of laboratory tests. Fine aggregate evaluation was performed using sieving test, laser diffraction, delta ring and ball test, bitumen number test, uncompacted void content of fine aggregate according to AASHTO T 304, voids of dry compacted filler (Rigden) test and particle density of filler. Laboratory research has led to the discovery of some properties of fine aggregate and their dependencies.
|
|
| |
|
|
Using Reclaimed Asphalt Pavement in High Modulus Asphalt Mixture for Binder Asphalt Courses
Klimek, Matěj ; Hýzl, Petr (referee) ; Šperka, Pavel (advisor)
The bachelor thesis deals with design of high modulus asphalt mixture with using 30 % reclaimed asphalt pavement in combination with polymer modified bitumen. The goal of this thesis is to verify if the mixture reaches the requirements of technical regulations TP 151 [1]. Selected tests were performer in accordance with the European standards ČSN EN 12697 Bituminous mixtures – Test methods for hot asphalt mixtures. Theoretical part of my thesis is focused on possibilities of addition higher amounts of reclaimed asphalt pavement into asphalt mixtures.
|
guest ::
